10 Essential Steps to Deep Clean Your Indoor AC Unit - AFTR

Ensure that the air conditioner is dry to the bone

Making sure that the air conditioner is completely dry is the first and the most important step before actually starting the cleaning process. Air drying for at least 30-40 minutes is done to avoid any potential electrical risks posed by wet components. You can accomplish this by quickly drying the air conditioner by setting it to "fan mode."

Turning Off The Air Conditioner By Unplugging It

Making sure that the air conditioner is completely dry is the first and the most important step before actually starting the Air cleaning process. Air drying for at least 30-40 minutes is done to avoid any potential electrical risks posed by wet components. This you can do by setting the air conditioner to ‘fan mode’ to dry the ac quickly.

Covering The Air Conditioner Unit With A Cleaning Bag

To protect the indoor and outdoor electrical parts of the air conditioner from damage during cleaning, another precautionary step that you should make sure of, is to cover the entire outdoor unit with a special cleaning bag or a plastic sheet to protect it from water or cleaner solutions.

Carefully Removing The Front Cover

Only the internal components of a split air conditioner can be accessed by removing the front panel. It should be made sure that this step is being done very carefully so that no fragile part of the air conditioner gets damaged.

Removing The Air Filters

Once the air conditioner’s front panel is removed, you will be able to see the filter. Locate the tabs that connect the filters to the unit, press them, and then gently remove the filters to remove the filter.

Cleaning the Air Purifiers

Make a solution of water and mild detergent first in order to clean the split air conditioner's air filters. Use this solution to gently scrub the filters using a sponge or cleaning pad. Your goal here is to remove all the trapped dirt and contaminants from the filters. Once the scrubbing part is done, it’s time to rinse off the solution and the dirt off the filters.

Cleaning The Cooling Fins

To locate the cooling fins, which are a set of metallic blades, you would first be required to remove the air filters. The fins require cooling as they accumulate dust and debris, which therefore reduces the cooling performance of the AC. To clean these fins, use a blower with a dust-collecting box or bag, making sure that the delicate fins are cleaned delicately.

Cleaning The Coils

Coils in a split air conditioner are round metal components that run down through the center. Cleaning the evaporator and condenser coils requires a condenser coil cleaning solution.

Clearing The Drain Line Clogs

Checking the drain lines for any kind of clog will make sure there are no water leaks in your air duct cleaning dubai. The step step in cleaning the drain pipes is to disconnect them. You will be required to use a special kit with water pressure to clean the air conditioner’s drain pipes. It is also important to air dry the drain lines after cleaning.

Turning On The Air Conditioner To Allow It To Clean Itself

After cleaning and fitting back the components of the split air conditioner, it is time to restart the air conditioner. This allows it to run and clean itself. This step also assures that the system is working properly and that clean, cold air is coming out of the air conditioner.