How to Set HP Envy Photo 7155

Solution for HP Envy Photo 7155 setup

The printer is specially designed for photo sharing lovers. Lets you print stunning, lifelike images with the HP Instant Ink service. Easily HP Envy Photo 7155 Set up your printer and connect it to the HP Smart app. Print from social networks or the cloud, and scan documents on the go with your mobile camera.

How to install the HP Envy 7155 printer?

1. Open the shipping box and take out all the accessories.
2. Carefully remove the printer from the box.
3. Remove all tape and packing materials from the outside and inside of the printer.
4. Check whether all the accessories have been delivered to you without any damage.
5. Connect your printer to an electrical source using a power cord.
6. Set the preferences on the control panel after the printer screen turns on.
7. Pull out the input tray and load plain paper in it.
8. Push the input tray into the printer.
9. Open the ink cartridge access door.
10. Insert the cartridge into the corresponding slot after removing the packaging.
11. Close the ink cartridge access door and the scanner lid.
12. Print an alignment page to check ink flow.

How to install HP Envy Photo 7155 driver?

• The printer comes with an HP Envy 7155 driver installation disc.
• Connect your printer and computer using a USB cable.
• Eject the CD drive from your computer.
• Push the drive in after inserting the disc.
• The computer automatically detects the disk and opens the folder containing the installation files.
• If not, go to My Computer and then open the folder.
• Select the operating system version and locate the installation file.
• Right-click on the file and choose the Copy option from the dropdown menu.
• Choose a destination path to save the file.
• Open the folder and right click on it again to continue.

How to print photos on HP Envy Photo 7155?

1. Connect the printer to a power source and turn it on.
2. Pull out the input tray and make sure it is empty.
3. Move the paper width guides all the way.
4. Load newly purchased photo sheets into the tray.
5. Push the input tray into the printer.
6. HP Envy Photo 7155 Set up your printer and computer on the same network.
7. Choose a photo to print and open it on your computer.
8. Click the File menu at the top of the screen and select the Print option from the dropdown menu.
9. Modify the photo quality settings if necessary, and then click OK.
10. Check the output tray for the printed photo.

HP Envy 7155 Instant USB Setup

The quick and easy procedure to set up the printer's USB connection is explained in the next topic.

1. Unpack the USB cable included in the printer package.
2. Before initializing the USB settings, download and install the printer driver software on your computer or laptop.
3. You can download the latest version of the driver from this site for free.
4. Choose the connection type as USB during the installation process of the HP Envy Photo 7155.
5. Plug in the cable when the screen prompts you to.
6. Connect the cable to the appropriate port on your printer and computer.
7. Now you can perform all the functions of the printer from your computer.

Easy Wireless Setup HP Envy Photo 7155

HP Envy 7155 Setting up a wireless network is very simple and easy. Almost all HP printers have the option of wireless configuration.

Configuring HP Envy 7155 to WiFi

1. Press the Wireless button on the printer's control panel.
2. If not, enable the Wi-Fi option by sliding the switch under the Wireless Settings menu.
3. Turn on the router and make sure it provides a strong network signal.
4. The printer connects to your wireless network automatically.
5. If automatic connection fails, check the printer screen for the list of available networks.
6. Choose a desired network.
7. A status message appears once the connection is established.
8. Activate the Wi-Fi function on your computer in the same way.
9. Connect your computer and printer to the same network.
10. Please refer to the user manual for more details.

HP Envy 7155 Wireless Direct Printing

1. HP Envy Photo 7155 Connect the printer to a power outlet.
2. Turn on the printer and the laptop you use to print.
3. Turn on the router and make sure it provides a stable internet connection.
4. Enable the Wi-Fi option on your printer's control panel.
5. Turn on the Wi-Fi feature on your computer's taskbar.
6. Check if both devices connect to your network automatically.
7. If the automatic connection fails, go to the Wireless Settings menu.
8. Select the Scan devices option and wait a few seconds.
9. Choose your desired network from the list of available networks.
10. The network is activated once the devices connect.

HP Envy 7155 ePrint Quick Setup

HP ePrint is a cloud-based application that allows you to print from anywhere in the world. Make sure your router has an active internet connection.

1. Connect your printer to the wireless network.
2. Choose a document to print and launch an email application on your computer.
3. Select the Compose icon at the top to open a new email.
4. Fill in the To field with the email address of the HP Envy Photo 7155 Setup printer.
5. Please enter a valid subject in the subject line of the email.
6. Select Attach at the top and add a document or photo to the email.
7. Click the Send button to share the document via email.
8. The printer automatically prints the received document.

HP Envy Photo 7155 Airprint Easy Setup

Apple AirPrint is a built-in mobile printing app for devices like iPhone, iPad, and iPod that runs on iOS version 4.2 or later.

1. Turn on your printer and enable the wireless network.
2. Connect it to your wireless router connected to a network source.
3. Make sure the WAP has a strong and active Internet connection.
4. Turn on wireless on your Mac device.
5. Connect your printer and MAC device to the same network.
6. Access the document for printing by opening it and touching the Share or Menu icon.
7. Choose the Print option and select your printer model.
8. Get the printouts of the HP Envy Photo 7155 printer setup.

Installing HP Envy Photo 7155 ink cartridges

The printer comes with a set of black and tri-color ink cartridges. Continue with the following steps to replace the ink cartridges.

How to replace the ink cartridge in the HP Envy 7155 printer?

1. Lift the scanner lid and open the ink cartridge access door on the HP Envy 7155 Setup printer.
2. Wait for the cart to move to the center and be idle.
3. Locate the ink cartridge assembly and open the slot covers.
4. Take the two ink cartridges out of the package.
5. The black ink cartridge slot is indicated by a black label and the tri-color by a pink label.
6. Insert the ink cartridges into their corresponding slots.
7. Close the ink cartridge access door.
8. Finally, print a test report to check the ink flow.

1. How to change the ink in HP Envy 7155?
2. Check the estimated ink level of each cartridge.
3. The ink level should not be less than the last mark.
4. If the level is low or the cartridges are not supplying ink, replace them by following the steps below.
5. Purchase a new set of ink cartridges from the manufacturer.
6. Make sure the cartridges you buy are compatible with your HP Envy Photo 7155 Setup printer.
7. Lift the scanner lid and open the ink cartridge access door.
8. Wait until the carriage is idle, and then open the ink slot covers.
9. Remove the old ink cartridge and insert a new one into its corresponding slot.

How to load paper in HP Envy 7155?

1. Grasp the input tray handle and pull it toward you.
2. Load plain paper in the input tray.
3. Push the photo tray into the printer.
4. Move the left and right paper guides as far as they will go.
5. Take a stack of regular papers and arrange them evenly.
6. Place the stack inside the tray and push it towards the rear of the printer.
7. Move the paper guides in until they rest against the stack.
8. Push the paper tray into the printer until it clicks into place.
9. A message will appear indicating that the paper has been changed.
10. Touch Yes and customize the paper settings accordingly.

How to scan on HP Envy 7155?

1. Open the Settings menu and click the Scan to Email option in the Applications menu.
2. Share the scanned document directly to the recipient's email using the e-print email address of their HP Envy Photo 7155 Setup printer.
3. Open Finder and click the Go button.
4. Select the Applications submenu.
5. Double-click the Image Capture option.
6. Modify the settings in the Scanner Settings tab and tap the Scan option.
7. Choose the format of the email to send, either as PDF or JPEG.
8. Enter the recipient's email address and touch Send to share the document.

How to scan multiple pages on HP Envy 7155?

1. Turn on your HP Envy 7155 Setup printer and select a document to scan. Lift the lid of the scanner.
2. Hold the document on the flatbed scanner and gently press the lid onto the paper.
3. Push the cover in until the LED light in the corner turns off.
4. Go to the printer menu on your computer.
5. Open the Scanner tab. Preview and customize scan settings.
6. Click Scan or OK to start the scanning process.
7. The printer makes a sound during the scanning process.
8. Save the displayed scanned document to your computer.

How to make copies on the HP Envy 7155 printer?

1. Place the original document you want to copy on the scanner glass or in the automatic document feeder (ADF).
2. Do not load photos in the ADF to avoid copy problems.
3. On the control panel of your HP Envy Photo 7155 Setup printer, tap the Copy option.
4. Touch the Settings icon to see more settings.
5. Change advanced settings if necessary.
6. Return to the home screen to start the copy function.
7. You can also touch the Start Black or Start Color button to initialize the copy function.

HP Envy Photo 7155 Troubleshooting

HP Envy 7155 is a dynamic printer; you encounter printing problems and operational problems. The methods to solve printer problems are clearly explained on our website.

Why doesn't HP Envy Photo 7155 pick up photo paper?

1. Turn on the HP Envy printer if it is turned off.
2. Disconnect the power cord when the printer turns on.
3. Wait a few minutes and connect the cable to the appropriate port on the printer and power supply.
4. Now the printer turns on automatically.
5. If the printer does not turn on, turn it on by forcibly pressing its power button.

How to solve HP Envy 7155 ePrint problem?

1. Reboot your printer.
2. Print a test page and check the status of the connection between your printer and the computer.
3. On the HP Envy Photo 7155 Setup printer control panel, select the HP ePrint icon.
4. Go to Settings and enable the Web Service option if it is disabled.
5. Check if you have entered the correct email address in the To field during submission.
6. If the problem persists, reset the network connection.

Why is HP Envy Photo 7155 not working?

1. Open the ink cartridge access door.
2. Wait until the carriage moves to the ink cartridge access region.
3. Lift the ink tank cover.
4. Remove the tri-color ink cartridge from the slot and check if it is worn out or misplaced.
5. Similarly, check if the black ink cartridge has run out.
6. If any of the ink cartridges run out, buy a new one from a reputable dealer. Reinsert the ink cartridges.
7. Repeat the printing process and check if the issue is resolved.

How to solve HP Envy 7155 installation problems?

1. Restart your printer and computer.
2. If you have connected the devices through a router, please restart the router.
3. Uninstall the outdated printer driver and reinstall it with the latest version.
4. You can take advantage of the latest driver version from this site for free.
5. Download and run the HP Print and Scan Doctor app to resolve the problem with your HP Envy Photo 7155 printer settings.