Can Mold Inspection Be Replaced by Home Mold Testing Kits?

Avoid purchasing mold test kits at any costs. Unfortunately, home mold test kits are a waste of money. Here are a few reasons why you shouldn't substitute a professional mold inspection for home mold testing kits.

Factors That Make Mold Test Kits a Bad Investment

The mold inspection, not the mold samples, is the most important factor.

Mold samples can be deceiving because they occasionally make erroneous claims about possible negative and positive outcomes. They can only be properly evaluated if an organized visual inspection is done in conjunction with infrared thermal imaging.

It is possible to predict potential threats from water sources, construction, and other factors that may be challenging for some people to detect, like ice formation in an inadequately ventilated attic, excessively drained yards, and foundation fissures.

Consumer Reports gives home mold test kits a "Not Recommended" rating.

Lab Inaccuracies That Can Be Proven

Using DIY kits, I've heard of "high mold" counts when the actual levels were quite low and "low mold" counts when the actual levels were quite high.

Dead spores are not accounted for in kits:

While DIY mold removal products and other water damage prevention measures try to remove mold, spores that have since died could still pose a health risk. On the DIY kit, for instance, Stachybotys, Chaetomium, and Ulocladium might not be seen.

Mold test kits don't give accurate results.

These kits' testing capabilities are quite limited, despite the fact that their primary purpose is to detect the presence of mold in the home. Simply "gravity" or "settling" plates, similar to those used in scientific testing procedures, are what they are.

It is important to understand that mold can develop on any surface, including those outside and in buildings, homes, and other enclosed spaces. In every home and environment, there are mold spores in the air, on surfaces, and on furniture.

The sample you chose from a Petri dish will probably have mold growing on it. That information is useless.

Mold test kit manufacturers earn by spreading fear through their products.

The presence of mold spores in the air is not a requirement for mold inspections. We already know that, excepting unusual circumstances like an operating room at a hospital, the response is almost invariably "Yes."

No useful information would be obtained by using a petri dish. It would merely confirm that there are mold spores in the air, which is something we already know.

Home mold testing kits are just designed to scare people away from using them and to generate revenue for the businesses who sell them.

The mold industry does not advise using home mold test kits.

Conclusion

These mold test kits' main objective is to generate revenue for the businesses who sell them. They frequently cause the person taking the sample to get anxious while offering little real value. The evaluation of the building for moisture sources and mold evidence is more significant than the mold sample itself when performing a mold inspection.

Every house has mold, even in little levels. But nobody enjoys having to deal with mold issues. You don't want to cope with the challenges of an inspection and removal. You don't, however, have an option. The challenges must be overcome, but the outcome will be good.

To solve the issue, you must hire a professional Toronto mold removal service provider. whoever is capable of completing the work successfully and possesses the essential knowledge and expertise in this field. Check out our article on selecting mold removal services.

https://iconrestoration.com/can-home-mold-testing-kits-replace-mold-inspection/