ABS Power State Failure Error Codes In Windows 10 And How To Fix Them

Have you been dealing with an ABS power state failure error code in Windows 10? If so, you’re not alone. This common issue can be incredibly frustrating, but luckily, there are steps you can take to get rid of this pesky error code. In this blog post, we’ll explain what the ABS power state failure error code is and how you can easily fix it on your own. Read on to learn more!

What is the problem?

The ABS (Advanced Configuration and Power Interface) Power State Failure Error Codes is a common problem in Windows 10. This error usually occurs during the boot-up process and prevents the system from loading properly. The error codes indicate a power state failure, which can be caused by a variety of reasons such as an incorrect power state setting, faulty hardware, or an incompatible driver. When this error occurs, your computer will not be able to start up correctly.

The error codes that are associated with this problem are usually 0xC0000428, 0x000000A5, or 0x0000007E. These error codes are displayed on the screen after the system attempts to start up. The exact cause of the error is difficult to pinpoint, as it could be caused by multiple factors. In most cases, however, the issue is related to a hardware or driver issue.

If you are encountering the ABS Power State Failure Error Codes in Windows 10, it is important to take steps to fix the problem. Fortunately, there are a few possible solutions that may help you get your system running again. Read on to learn more about how to fix this problem.

What are the error codes?

When you are confronted with a Power State Failure error code in Windows 10, it is important to identify the specific code so you can diagnose and address the issue. Some of the error codes associated with this issue include:

• 0xC000021A - This error code indicates that the process or thread has been terminated due to an internal error.

• 0xC000009A - This error code indicates that an invalid system memory address was referenced.

• 0xC0000005 - This error code indicates that an access violation occurred in a program or application.

• 0xC0000218 - This error code indicates that the current process has encountered an unrecoverable error.

• 0xC000021B - This error code indicates that an unexpected kernel mode trap was encountered.

• 0xC0000001 - This error code indicates that the system was unable to start because of an internal system error.

• 0xC00002B0 - This error code indicates that a critical process died.

• 0xC000035A - This error code indicates that the machine check exception was detected.

These error codes are usually indicative of a larger problem, such as a corrupt driver or a corrupted system file. In some cases, these errors may be caused by faulty hardware, and in others, the underlying cause may not be easily determined. The only way to be sure is to investigate further, which is why it is important to properly diagnose the issue before attempting to fix it.

What are some possible solutions?

1. Run the ABS Troubleshooter:

The Microsoft's built-in ABS Troubleshooter may be used to solve this problem. It scans for any problems with your computer's startup and can offer solutions to fix them. To run the ABS Troubleshooter, open the Start menu and search for “Troubleshoot”. Then, select the option “ABS Troubleshooter”.

2. Update your device drivers:

Sometimes, outdated or incompatible device drivers can cause the ABS Power State Failure error. To update them, open the Device Manager by right-clicking on the Start menu and selecting “Device Manager”. Then, find the device you wish to update and right-click on it. Finally, select the option “Update driver” and follow the on-screen instructions.

3. Check your BIOS settings:

It is possible that the problem is caused by an incorrect setting in your BIOS. To check this, enter your BIOS setup by pressing a specific key when you start up your computer (usually Del, F1 or F2). Once there, find the option for “ACPI Suspend Type” and set it to “S3 (STR)”. Save and exit from BIOS.

4. Reset your PC:

This will restore it to its factory settings and can potentially fix any problems you are having. However, make sure to back up all of your important files before doing so.

These are some possible solutions for fixing the ABS Power State Failure error codes in Windows 10. If none of these methods work for you, it is recommended that you contact a technician to diagnose and repair the issue.

What should you do if the problem persists?

If the ABS Power State Failure error codes remain after attempting the solutions outlined above, there are a few other steps you can take. First, you should attempt to update all of your drivers. This could help resolve any issues related to outdated or incompatible hardware. You can use Windows Update or Device Manager to do this.

You should also try running a system scan with Windows Defender. This will check for viruses and malware that may be causing the problem. You can also try doing a full system restore if the problem continues. System Restore will roll back your computer to an earlier point in time, before the problem started occurring.

If all else fails, you may need to contact your manufacturer or a certified technician for further help. They may be able to diagnose the issue and provide more specific instructions on how to fix it.

Read more about IT HUB