How should I Factory Reset Airtel 4G Hotspot Router ?

Are you experiencing connectivity issues, slow internet speeds, or other problems with your Airtel 4G Hotspot Router? Sometimes, a simple reboot or resetting the router's settings may not be enough to resolve the issue. In such cases, performing a "Factory Reset Airtel 4G Hotspot Router" can be an effective solution.

This process restores the router to its original factory settings, clearing any custom configurations or software glitches that may be causing the problem.

Follow these 10 easy steps to "Factory Reset Airtel 4G Hotspot Router" and get your internet connection back on track.

Step 1: Gather the Necessary Tools

Before you begin, make sure you have a paperclip or a similar pointed object handy. This will be used to press the reset button on your Airtel 4G Hotspot Router.

Step 2: Power on the Router

Ensure that your Airtel 4G Hotspot Router is powered on and connected to a power source. If the router is already powered on, skip to the next step.

Step 3: Locate the Reset Button

On the back or side of your Airtel 4G Hotspot Router, you'll find a small recessed button labeled "Reset." This is the button you'll need to press to initiate the "Factory Reset Airtel 4G Hotspot Router" process.

Step 4: Press and Hold the Reset Button

Using the paperclip or pointed object, press and hold the reset button for approximately 10-15 seconds. This will initiate the "Factory Reset Airtel 4G Hotspot Router" process.

Step 5: Wait for the Router to Reboot

During the reset process, the router's lights may blink or go off temporarily. Do not interrupt the process or disconnect the power supply. Wait patiently until the router fully reboots and the lights stabilize.

Step 6: Disconnect and Reconnect the Power Supply

After the router has rebooted, disconnect the power supply from the router for a few seconds, then reconnect it. This step ensures that the "Factory Reset Airtel 4G Hotspot Router" process is complete and the router starts with a clean slate.

Step 7: Access the Router's Configuration Page

Once the router has rebooted and the lights are stable, you'll need to access the router's configuration page. This can usually be done by entering the default IP address (often 192.168.1.1 or 192.168.0.1) in your web browser's address bar.

Step 8: Enter the Default Login Credentials

When prompted, enter the default login credentials for your Airtel 4G Hotspot Router. These credentials can typically be found in the user manual or on the router's label.

Step 9: Reconfigure the Router's Settings

After successfully logging in, you'll be able to access the router's configuration interface. Here, you can set up a new Wi-Fi network name (SSID) and password, as well as configure other advanced settings according to your preferences.

Step 10: Save and Apply the New Settings

Once you've made the desired changes, be sure to save and apply the new settings. Your Airtel 4G Hotspot Router will now be running with the factory default settings, along with any additional configurations you've made.

Conclusion

By following these simple steps, you've successfully completed the "Factory Reset Airtel 4G Hotspot Router" process. This can be a powerful troubleshooting tool when dealing with persistent issues or preparing to sell or replace your router.

It's important to note that a factory reset will erase all custom configurations, including Wi-Fi passwords, parental controls, and any other settings you've previously set up. Be prepared to reconfigure your router from scratch after the reset process.

If you encounter any difficulties or have specific questions during the "Factory Reset Airtel 4G Hotspot Router" process, don't hesitate to consult the user manual or contact Airtel's customer support for assistance.

Read More - Factory Reset Airtel 4G Hotspot Router