Kodak Printer Not Printing Black

Kodak Printers while operating may face a whole host of technical snags ranging from faulty cartridges to a malfunctioned printhead to corrupt files of printer-specific drivers.

I encountered a Kodak Printer Not Printing Black issue which I was able to fix by getting a series of troubleshooting steps executed not just to ascertain the specific cause for the issue but also to find a fix for the same. So, here is a quick guide that can you always refer to for getting the Kodak Printer Not Printing Black issue resolved.

Check the Calibration of Kodak Printer

The prime reason for the Kodak printer not printing black ink issue is the inappropriate calibration of your Kodak Printer. You can check the calibration by performing a self-diagnosis of your Kodak printer after inserting a new cartridge along with inspecting the alignment of the printer. This would probably help you fix the black ink issue.

Causes of the Issue:

You might have encountered Kodak printer not printing black ink due to some common reasons as listed below:

• An issue with the ink cartridges
• The faulty printhead of the printer
• Missing files of the printer driver
• Damaged printer

Fixes for the Issue of Kodak Printer Not Printing Black

Whenever you are facing an issue and you notice that the Kodak printer will not print black ink, you need to follow some troubleshooting to overcome this issue. The simple and easy steps to fix this issue are as follows:

Check Calibration: In the first step, you need to check the calibration as in most of the cases, this is the cause of the black ink issue. You can check and even if your printer is calibrated, it must be rechecked by inserting a new ink cartridge. To perform this, you must use the features of self-diagnostic on the printer. You must check the alignment feature also.

Clean Cartridges: It might be possible that the cartridges are dirty or the ink is spilled over them. For this, you need to remove the cartridge completely from the printer and then clean the scanner and laser points. For cleaning, you can use a dry cotton swab, and do not use water. After cleaning it, you can try printing a page and check if it is working properly or not.

Check Cartridge Tape: The new ink cartridge is equipped with a plastic strip for protection, to prevent it from spilling out. It might be possible, that you have forgotten to remove the protective plastic layer. So, you need to check whether the tapes are removed or not. If it is there, remove it and try using the printer.

Update Printer Driver: It might be possible that your Kodak printer is not working properly due to outdated printer drivers. So, for proper functionality, you must check for the available updates. If there is any latest version available, you need to install it on your computer system. To update the driver, you need to go to the Control panel and select the printer category. Then, under System and Security, you can update your printer driver. Once it is done successfully, restart your computer as well as your printer and check by printing a page.

If you are still facing the issue of the Kodak printer not printing black properly, then you go to the official website and get help from there. The technical experts will assist you with the issue by providing you with tips and troubleshooting steps. If you have any other issues related to the Kodak printer, you can discuss that also.

Clean Cartridges of Kodak Printer

Your Kodak printer cartridge might have been stained which can be cleaned using a mop or brush. You should then be cleaning the scanner or laser points.

Subsequently, you must remove your Kodak printer cartridge and must fix it again after sweeping a piece of dry cotton on the cartridge. Now test the proper functioning of the cartridge by getting a page printed.

Check Kodak Printer Cartridge Tape

You may have not removed the plastic strip from the cartridge while fixing the new cartridge into the slot inadvertently. This may have possibly caused your Kodak printer not to print appropriately.

To fix this up you must ensure that the plastic strip is removed from the ink spilling end.

Updating Kodak Printer Driver

Your printer may not have been properly paired with the latest driver which may be causing Kodak Printer Not Printing Black. This happens also because of some files in the driver may be missing.

For this, you need to update this by going to the Control Panel and searching for the relevant drivers from the System and Security option under Printer category. Alternatively, you can also get the latest drivers for your Kodak printer from Kodak’s website.

Replacing the Damaged Components of Your Kodak Pinter

In a remote possibility, your Kodak printer may be damaged, the ultimate remedy for which is to replace the damaged Kodak printer. Even after following the above steps, if the Kodak printer not printing black ink issue is persisting then you must contact persons with technical expertise in dealing with printer-related problems.