How to build a 3D solar panel in under an hour, and get your solar cells 4 times cheaper!

Are you looking to build a 3D solar panel in under an hour and get your solar cells 4 times cheaper? If so, this blog post is for you! In this post, I'm going to walk you through the steps of building a 3D solar panel and provide you with the secret to get 1000W solar cells for less than $100. By the end of this post, you will have a working 3D solar panel and have saved money in the process. So, let's get started!

What You'll Need

Before you begin building your 3D solar panel, you'll need to make sure you have the following items:

1. A soldering iron and solder

2. A roll of copper tape

3. Solar cells (aim for 1000W worth)

4. An acrylic sheet

5. Plexiglass panels

7. A drill

8. Wire cutters

9. Wire strippers

10. An inverter (optional)

Once you have all of the necessary materials, you're ready to get started on building your 3D solar panel! Start by soldering the solar cells together, making sure that there are no gaps between them. Make sure to use plenty of heat when soldering, as this will help ensure that each cell is connected properly. When the cells are all connected, use the copper tape to attach them securely to the acrylic sheet. Take care to place each cell evenly spaced apart so that they can capture sunlight from all angles.

The Secret to Getting Solar Cells 4 Times Cheaper

If you’ve ever looked into getting solar cells for your projects, you know how expensive they can be. But what if we told you that you could get the same amount of power from a solar cell for four times cheaper?

It’s true! By shopping around and finding a reliable supplier, you can easily get 1000W of solar cells for less than $100. How is this possible?

The secret lies in buying in bulk. By purchasing larger quantities, suppliers are able to offer a bulk discount on their solar cells. In fact, some companies even offer discounts of up to 50% for bulk orders.

The other secret to getting solar cells four times cheaper is shopping around. Don’t just buy from the first supplier you come across. Take the time to shop around and compare prices from different suppliers. You might be surprised at the deals you can find!

Finally, don’t forget to look out for special offers and discounts. Many suppliers run promotional campaigns where they offer discounted prices on their products. Keep an eye out for these offers and take advantage of them whenever you can.

Now that you know the secrets to getting solar cells four times cheaper, you’re ready to start building your own 3D solar panel in under an hour.

Building the Panel

The first step in building your 3D solar panel is to prepare the frame. You will need two pieces of plywood, two sheets of plexiglass, and four strips of 1”x2” wood. Cut the plywood into two rectangles and drill a hole in the center of each piece. Then attach the 1”x2” strips to the plywood frames using screws.

Next, attach the plexiglass sheets to the frames using a silicone sealant. Make sure that the plexiglass sheets are centered on the frames, and that they fit securely.

Once you have the frame ready, you can start assembling the solar cells. Each solar cell will need two copper wires attached to its back. Use copper wire strippers to strip off the insulation from the copper wire, then wrap the wire around each solar cell and solder them together. Once all the cells are connected, use an epoxy glue to secure them in place.

Now it's time to install the solar cells into the frame. Make sure that the cells are facing south and that they are securely held in place with adhesive tape or epoxy glue. Finally, connect all of the solar cells together using electrical wire and seal them off with more epoxy glue.

Your 3D solar panel is now complete! With just a few tools and a bit of patience, you can create your own efficient and affordable solar energy system in under an hour!

Try the Solar Switch Step-By-Step Videos and Blueprints Risk FREE for the next 60 days

Get The Solar Switch video guide & blueprints